Electric Pressure Washer Motor Not Start?

Electric Pressure Washer Motor Not Start

Winter has gone, and it’s time to pressure wash your yard. And you get your winterized electric pressure washer ready. But what you find your electric pressure washer motor is broken. The anticipation has now been converted into irritation. Now your special guest is arriving tomorrow.

There are many reasons why this could be happening. It is a frustrating experience to see the electric pressure washer motor not start after you have done all your parts to start. What makes this even more difficult is that you have no idea what might be wrong with it.

You can take some steps to troubleshoot and fix the problem before calling in a professional for help. After using it repeatedly, the bearings in a pressure washer will wear down over time and eventually stop working correctly. Luckily, replacing them is an easy fix that can save you from buying a new machine.

How To Fix Electric Pressure Washer Motor Not Start?

If the motor doesn’t start, it’s usually due to one of these two problems: insufficient water supply or a faulty electrical component.

1). The first thing you want to do is make sure your pressure washer motor isn’t damaged. It can be quickly done by flipping the power switch off and on again. If it still doesn’t start, then there are a few other things that could be wrong.

2). Now the second most common problem is water getting into the electric motor or onto its electrical connections. You can usually fix this problem by opening up the electric motor and ensuring that water doesn’t have access to these areas.

3). If this doesn’t work, the motor has been used too much, running continuously for several hours, or powerful pressure might have burned the motor.

4). If the motor is perfectly working fine, then the solenoids in your pressure washer may have been damaged. In this case, you’ll need to replace these parts.

5). Now, check the pressure of the unit if there is no pressure coming from the pump inlet. If the channel is broken, fix it with the unloader screw and replace any broken seals/springs.

6). If any of the above steps does not make the motor back to its running stage, then it’s time to call the professional to fix the problem.

Final Words

We hope that the troubleshooting tips we’ve provided will help you get your pressure washer up and running again. If not, please consult with a professional to see if they can fix it for you or replace any faulty electrical components at their own risk.

Have you tried these steps? What other issues have caused your electric pressure washers motor not to start? Let us know what has worked in the comments below.

Leave a Reply

Your email address will not be published.